• C3//Neuroid walk-through, pt 1

    C3//Neuroid walk-through, pt 1

    This version of modular//neuroid was made specifically for the C3 project, a collaboration with the New York Hall of Science. ...
  • M//N Awarded William Randolph Hearst Scholarship, Köln Design Preis Nomination

    M//N Awarded William Randolph Hearst Scholarship, Köln Design Preis Nomination

    I am extremely proud to announce that Modular//Neuroid has won a $4,000 award from the William Randolph Hearst Scholarship fund. ...
  • new enclosure finally complete!

    new enclosure finally complete!

    I have been working on this enclosure for about a month now. I have collaborated very closely with a...
  • modular//neuroid BT v02

    modular//neuroid BT v02

    I have prototyped a printed circuit using a technique I have documented here. The board has USB ports, the Arduino-compatible ATMega...
  • modular//neuroid Bluetooth v01

    modular//neuroid Bluetooth v01

    As I mentioned in my previous post, I am now putting forth all of my thesis effort into the collaboration...
  • Collaboration with the New York Hall of Science!

    Collaboration with the New York Hall of Science!

    It is official! Modular//Neuroid and The New York Hall of Science will be collaborating to create a multi-layered experience...
  • User Testing at New Heights Academy Middle School

    User Testing at New Heights Academy Middle School

    Last month, I got the opportunity to visit the New Heights Academy Middle School in Harlem, NYC.  I went with...
  • enclosure v02

    enclosure v02

    Here is the final outcome of the 3D printed model. This was not an easy process, and was also...
  • MSP 3D printable prototype

    MSP 3D printable prototype

    With help from a friend, Thai Le, I have the first prototype of the MSP enclosure, which I will have...
  • Pachube + openFrameworks

    Pachube + openFrameworks

    Last week I contacted Pachube to get access to their API (they are still in beta, so you must be...
  • sensor hub, prototype v02

    sensor hub, prototype v02

    The results of my homemade PCB experiment were extremely successful.  hub v02 features 4 USB female USB ports, with access...
  • sensor hub, prototype v01

    sensor hub, prototype v01

    This was my first prototype of the hub that will allow the user to connect and disconnect sensors as they...
  • armband, prototype v01

    armband, prototype v01

    I had some help from Ira in making this first legitimate prototype happen, however I have had positive user test...
  • enclosure prototype

    enclosure prototype

    The arduino + shield will need to be housed in some sort of enclosure, and then attached to the wearable...
  • Processing to PHP

    Processing to PHP

    This is an initial test of the application I am writing to upload data from the SD card to a...
  • arduino + GPS Shield

    arduino + GPS Shield

    Here is the Arduino and Adafruit’s GPS shield, assembled and put together.  This will be the brains for reading sensor...